一种不依赖剩余时间估计的巡航导弹多约束制导律

针对巡航导弹末段多约束精确打击问题,提出了一种不依赖剩余时间估计的攻击角度/时间制导律。推导了航向弹目相对运动关系,设计了一种基于附加航向角设计的时间约束制导律,通过对时间增益系数的设计和优化,实现附加航向角的调节,可使实际飞行时间向期望时间快速收敛;在此基础上,将角度约束制导律与时间约束制导律相结合,得到了一种角度/时间约束制导律。该制导律不依赖于剩余时间估计,进而实现多约束条件下航向轨迹自适应调整;通过求解偏置导引律闭环轨迹分析得到轨迹收敛条件,给出满足角度/时间约束制导律的显式收敛条件。最后通过数学仿真验证了本文提出的航向多约束制导律可满足时间和角度等多约束条件且具有快速收敛特性。     

Digital signal processing and numerical analysis for radar in geophysical applications

Numerical solutions for signal processing are described in this work as a contribution to study of echo detection methods for ionospheric sounder design. The ionospheric sounder is a high frequency radar for geophysical applications. The main detection approach has been done by implementing the spread-spectrum techniques using coding methods to improve the radar’s range resolution by transmitting low power. Digital signal processing has been performed and the numerical methods were checked. An algorithm was proposed and its computational complexity was calculated.     

基于特征空间变换的运载火箭Pogo模型降阶方法

针对运载火箭Pogo状态空间模型存在维数高和奇异性的问题,开展了Pogo模型的降阶方法研究。基于特征空间变换理论,导出了一般形式的Pogo状态空间模型的解耦形式。该形式与推进系统和结构系统的模态频率相对应,从而通过模态截断或保留感兴趣的模态实现有效的模型降阶。同时,还给出了降阶方法的实数运算公式。在两种不同型号推进系统的火箭Pogo问题中进行了仿真校验。结果表明所提出的降阶方法对奇异和非奇异Pogo状态空间模型都能给出正确的降阶模型,显著地提高计算效率,具有很好的通用性,为Pogo时域仿真和主动抑制提供了合适的模型。     

一种基于时间梳技术的高频正弦信号相位差测量方法

本文研究了一种基于时间梳原理的高频正弦信号相位差测量方法,给出了时间梳原理的数学模型,并详细分析了其特点,并将此原理首次应用于高频信号的数据采集中,可以用低频和被测信号构建一种高频等效采样技术,可以在不满足乃奎斯特采样定理下,对被测两路正弦信号进行同步采样,避免了高频信号采样的高采样率,结合多重互相关技术,实现了对高频正弦信号的相位差的高精度测量,实验结果表明本文算法对高频信号对高频正弦信号的相位差测量具有很高的测量精度,尤其在低信噪比下也有较高的测量精度,具有较高的工程实用价值。     

地月空间星地双向单程测量高精度模型

针对使用星地双向单程测量技术实现给定场景下的地月空间高精度测量问题,建立了地月空间纳秒级星地时差解算模型与米级瞬时距离解算模型,定量分析了模型中各因素的量级,并对模型中收发时延、引力时延、定轨误差和大气延迟等多种因素引入的时差和距离估算误差进行了定量分析。仿真数据的处理结果校验了误差量级理论分析的准确性,时差估算的均方根误差优于7.6ns,瞬时距离估算均方根误差优于2.4 m。建立的模型可以对地月空间星地DOWR测量数据进行高精度处理,实现地月空间高精度时间比对,支持未来中国载人登月等任务及地月空间高精度导航技术。     

CHAMP卫星加速度计标校参数序列的谱分析

给出了利用能量守恒方法求定CHAMP卫星加速度计标校参数的基本原理和算法．对2001年8月-2003年12月共约两年半的CHAMP卫星加速度计数据进行了标校,导出了尺度、偏差和偏差漂移参数的时间序列,分别采用最小二乘谱分析和抗差谱分析对这些时间序列进行了分析．结果表明,尺度、偏差和偏差漂移参数都有明显的周期变化,但各主周期项略有差异．尺度的主周期是441d、220d、126d和13．4d的周期变化,其中220d和441d的周期变化的贡献相对较大．偏差中有明显的220d、126d和13．4d周期变化,各周期变化的贡献几乎相当;偏差漂移的主周期是220d、13．4d和9d的周期变化,其中13．4d的周期变化最为显著,几乎比其他周期项变化高出一个数量级．另外尺度和偏差参数还有明显的长期变化,而偏差漂移参数的长期变化不明显．     

基于马尔可夫链的飞机刹车片检查时间确定

为结合飞机实际运行工况,科学合理地制定刹车片检查时间,提出了一种基于马尔可夫链理论的预测模型。以某一机群刹车片检查时间确定为例,分别论述了刹车片磨损状态的划分,以及转移概率矩阵的构造与估计,并对该机群刹车片磨损状态进行了预测,其预测结果与实际检查情况较吻合。根据刹车片磨损状况的预测结果,制定了该机群在实际运行工况下的刹车片检查时间。实际运行情况表明,所制定的刹车片查检时间可行、有效。     

Predicting lean blow-off of bluffbody stabilized flames based on Damköhler number

Lean Blow-Off(LBO) prediction is important to propulsion system design. In this paper,a hybrid method combining numerical simulation and Da(Damk?hler) model is proposed based on bluffbody stabilized flames. In the simulated reacting flow, Practical Reaction Zone(PRZ) is built based on OH radical concentration, and it is considered to be the critical zone that controls LBO.Da number is obtained based on the volume-averaged parameters of PRZ. The flow time scale(s_f)indicates the residence time of the fresh mixture flowing through the PRZ. It is obtained based on the characteristic length and volume-averaged axial velocity of the PRZ. The chemical time scale(s_c) indicates the shortest time needed to trigger the reaction of the mixture. It is obtained by commercial software CHEMKIN through monitoring the transient variation of the reactor temperature. The result shows that the average Da number under different LBO conditions is 1.135(the Da number under each LBO condition ranges from 0.673 to 1.351). This indicates that the flow time scale and chemical time scale are comparable. The combustion is in a critical state where LBO is easy to occur. With the increase of the fuel mass flow rate(the global fuel/air ratio increases from 0.004761 to 0.01095), s_f increases from 0.001268 s to 0.007249 s, and s_c decreases from 0.00124 s to0.00089 s. Accordingly, Da number increases from 1.023 to 8.145, which shows that the combustion becomes more stable. The above results show that the method proposed in the present study can properly predict the LBO limits of combustors, which provides important technical supports for combustor design and optimization.     

Object-based rice mapping using time-series and phenological data

Remote sensing techniques are often used in mapping rice, but high quality time-series remote sensing data are difficult to obtain due to the cloudy weather of rice growing areas and long satellite revisit interval. As such, rice mapping is usually based on mono-temporal Landsat TM/ETM+ data, which have large uncertainties due to the spectral similarity of different vegetation types. Moreover, conventional pixel-based classification method is unable to meet the required accuracy for rice mapping. Therefore, this study proposes a new strategy for mapping rice in cloud-prone areas using fused data of Landsat-8 OLI time-series and phenological parameters, based on the object-based method. We determine the critical growth stages of paddy rice from observed phenological data and MODIS-NDVI time-series data. The spatial and temporal adaptive reflectance fusion model (STARFM) is used to blend the MODIS and Landsat data to obtain a multi-temporal Landsat-like dataset for classification. Finally, an object-oriented algorithm is used to extract rice paddies from the Landsat-like, time-series dataset. The validation experiments show that the proposed method can provide high accuracy rice mapping, with an overall accuracy of 92.38% and a kappa coefficient of 0.85.     

星基量子定位导航系统的测距、定位与导航

基于量子定位导航系统原理,设计并分析了基于3颗卫星的星基量子定位导航系统的测距与定位过程,包括星地光链路的建立、量子纠缠光的发射与接收、到达时间差的获取、量子定位导航系统的测距,以及用户坐标的计算与导航,并对量子定位导航系统中的每个过程的实现进行了详细的阐述。